It seems we can’t find what you’re looking for. Perhaps searching can help.
It seems we can’t find what you’re looking for. Perhaps searching can help.
We welcome Mr Yasutaka Inoue , Mr Takuji Fujimaru , Mr A Kawahata from Japan. They plan to set up a manufacturing plant in Pune, India. KGC Skill Centre assures them training and skilled welders chiselled to perfection.
Trade Testing for Romania. Deepak Gaikwad and Prakash Gaikwad were trained at KGC International Skill Centre. The trade testing was conducted via video channels. Both were successfully tested. Well done Deepak and Prakash.
Welders Trade Test conducted for a Japanese Company. We thank you for your appreciation of our skill centre.
Guests from a French company visit our skill centre. The company is one of the market leaders in building special purpose machines for the pharma & food Industry. They are starting their operations in Pune, India. KGC assures them of providing the best-skilled workforce for their manufacturing requirements. KGC assures best assistance and support, in setting up their operations in India.
We are committed to prove that “Make in India” is the best way forward for all.
KGC team successfully completed the welding training program for Welders and Supervisors at a renowned Multi-National Manufacturing company based in Mumbai. The objective of this program was to asses existing skills and knowledge and provide training after the gap analysis. The program was aimed to improvise efficiency and quality on the shop floor. With excellent feedback from participants and company management, our team has got its reward. Another step towards our mission to see India as the skill capital of the world. Well done team KGC.
This family of deer was created by skilled craftsmen trained at our skill centre. Our weld artist program is first of its kind in India, which is designed and delivered to produce metal artist, s who create beautiful sculptures. With attention to minute details, our creations fill your spaces with beauty. Just like the sculptures, every individual who trains at KGC gets chiseled to perfection.
To get more information about our weld artist program and to buy our metal creations, email us on info@kgcskills.com
Today our students were interviewed and successfully tested for employment at our skill center by a renowned company in Pune. Congratulations to Shubham Kadam, Pratik Mahanwar, Tushar Bagul. Well Done team KGC!!!
KGC will train, certify and place these students abroad upon completion and after 6 months of domestic work experience. Best Wishes to our new trainees. Welcome to KGC where you will be chiseled to Perfection. Good Luck!!!
An upskilling course was designed for GE to ensure that the required skill was acquired by the candidates in the quickest possible duration.
Soft skills training given to our first batch of Welders, who will be trained, certified and placed aboard by KGC International Skill Center.
KGC Team conducted a an awareness and counseling program at Hutatma Rajguru Mahavidyalaya, Khed – Providing information about potential avenues in the field of Welding. Students were made aware of the various awareness and knowledge programs that KGC conducts which enhances the chances of employment upon graduation. Well done team KGC.
KGC Team creates awareness among Welding Trade-ITI Pass outs of Pimpri ITI, about skilling and development in welding.
These students are given knowledge about the industry and the potential and opportunities of working abroad upon successful training and certification. Well done team KGC.
KGC Skill Center participates in Counseling for ITI Pass outs and creating awareness in Skill development in Welding and opportunities in various Industry Sectors in India and Abroad
Well done Team KGC !!
KGC International Skill Center announces the starting of its New Batch in Advance Level Training in GTAW
KGC International Skill Centre student Pratik Mahanwar selected for apprentice’s regional competition held at ATI (Advance Training Institute) Mumbai for Welder Trade. This competition is conducted yearly by the 
Government of India for Identifying skilled candidates.
KGC International Skill Center starts its first ‘Welders Training Batch’ for international placements.
The candidates will be trained over a period of 3.5 months along with
with On The Job training to attain 6G Welding Skills in GTAW+SMAW. These candidates will be Trained, Certified and Placed abroad through KGC International Skill Center.
Good Luck and Best wishes to our young, enthusiastic and hardworking students.
We thank CGSC Team for their support while conducting the Training of Trainers Event at KGC Skill Center.
KGC International Skill Center conducts Counseling Event for providing information to candidates on welding training and Job Opportunities in India & Abroad.
Special Thanks to Mr Jaspal Singh-Head Quality & Welding, GE Multimodal Manufacturing, for his availability and speech on prospects of Welding in the Aviation and Transportation Sectors..
Mr Peter Linford-Vice President, Nasser Al Hajri Corp, Saudi Arabia Visits KGC International Skill Center with Mr Arunkumar Pillai
KGC International Skill Center Conducts NDT Level II Training & Certification Program in Helium Leak Testing
Capital Goods Skill Council Visit along with Semta, UK in 2016
| Program Title | Program Code |
|---|---|
| ASME Sec V Awareness | AE-05 |
The objective of the course is to enhance the attendee’s understanding and application of ASME codes interrelations as regards the quality assurance, testing of pressure vessels. The course offers an overview of ASME codes, and detail structure and application of section V. Various NDE methods, applications, NDE procedure preparation, Essential and nonessential variables. Mechanics of using the code and how to address its, stated and implied requirements will be explained in a simple, straightforward manner.
Highly recommended to the newcomers and more experienced persons associated with pressure vessels, Boilers, Heat Exchangers, etc. The design engineers, project engineers, production engineers, and QA/QC personnel would find the course immensely beneficial.
| Program Title | Program Title |
|---|---|
| ASME Sec IX Awareness | AE-04 |
Objective of the course is to enhance the attendee’s understanding and application of ASME codes inter relations as regards the fabrication, quality assurance, testing of pressure vessels. The course offers overview of ASME codes, and detail structure and application of section IX. Overview of welding processes, Welding general requirement , qualification standard welding/Brazing procedure specification (WPS/BPS), Procedure qualification (PQR) , Welder/ Brazer performance qualification (WPQ/BPQ) , Essential and non essential variables, testing requirements . Mechanics of using the code and how to address its, stated and implied requirements will be explained in a simple, straightforward manner.
Highly recommended to the newcomers and more experienced persons associated with manufacturing and fabrication of components by welding . pressure vessels, Boilers, Heat Exchangers, oil and gas, maintenance, construction etc. The welding engineers, design engineers, project engineers, production engineers, welding supervisors , foreman and QA/QC personnel, inspection agencies would find the course immensely beneficial.
| Program Title | Program Code |
|---|---|
| Welding Inspector Certification Program | KGC-AE-03 |
This is an extensive training program focusing on the responsibilities of Welding Inspector and inputs required for carrying out these responsibilities The program covers basic Welding Metallurgy, Welding Processes, Welding Consumables, Weld Discontinuities and Destructive Testing and NDT of welds. It imparts practical training on use of welding gauges, Visual inspection and accept / reject criteria of welded assemblies. A detailed review of Welding Procedure Specification (WPS), Procedure Qualification Record (PQR) and Welders Performance Qualification (WPQ) in line with ASME Section IX requirements will be extensively covered.
Ideally suited for all QA/QC and inspection personnel involved in making decision, exercising of judgement on the weld fit-ups, in-process and post welding inspection of weld joints.Suitable for personnel in oil and gas manufacturing, fabrication, maintenance and inspection agencies. Ideally suited for the candidates preparing for AWS Certified Welding Inspector’s exam, welding supervisors , foreman, welders.
Minimum 2 Years experience required .
| Program Title | Program Code |
|---|---|
| Introduction to Welding Technology | AE-02 |
This Program is designed to educate and create awareness about Welding , NDT Techniques used and its application and Globally accepted ASME code.
This gives and over all knowledge about 5 Important NDT Techniques -RT,PT,UT,MPT,VT. upon the completion of the course the candidate shall be aware of the Welding Process, Symbols, position, Weld joints, Welding Defects, Discontinuities and remedies, Welding Metallurgy, Do and Don’ts Before Welding, During Welding and After Welding, Welding Documentation Part – Weld Map, Welders continuity Record, WPS, PQR and WPQ (Hands on Practice), When and how to conduct re qualification of WPS, PQR and WPQ, Handling of measuring equipments.
All related sections of the code are discussed and candidate is made aware of how to refer to the Code as below.
| Program Title | Program Code |
|---|---|
| Radiographic Evaluation And Interpretation Course | AE-01 |
This course is designed to impart professional and systematic training in methodology of understanding and evaluation of radiographic examination. The course is conducted by ASNT Level III qualified instructors to provide the participants with the knowledge that is authoritative and hands on practice based on interpretation of thousands of radiographs.
The course includes review of conventional and non-conventional radiography, techniques, codes, procedures and acceptance standards etc, backed up by extensive interpretation practical’s covering IQI sensitivity, contrast, definition, density , artifacts , and pass / fail evaluation.
This is user level certification program leading to level I/II in line with SNT-TC- 1A 2011 qualification. Ideally suited for inspection personnel from manufacturing industries, fabrication workshops, plant construction sites, piping engineers, consultants, inspection agencies etc. Who are doing radiography in-house or getting it done from side agencies, and engaged in radiographic interpretation & reporting would find the program highly beneficial. The minimum experience required for this program is 1 year. (in Radiographic testing).
Liquid Penetrant Testing Level II
This course is designed to impart professional and systematic training in methodology and application of penetrant testing drawn up on the basis of ASNT (American Society of Non-Destructive Testing) qualification program conforming to SNT-TC-1A requirements. The course is conducted by ASNT Level III qualified instructors to provide the participants with the knowledge that is authoritative and hands-on practice.
The program covers the review of penetrant techniques applications (codes, procedures and acceptance standards) interpretation of indication and evaluation of test results visible and fluorescent methods employing visible and fluorescent penetrant techniques.
The practicals include penetrant testing on different materials, use of visible and fluorescent, dry, wet, solvent suspended developers and preparation of test documentation.
This is a user-level certification program leading to level II in line with SNT-TC-1A 2011 qualification. Ideally suited for inspection personnel from manufacturing industries, fabrication workshops, plant construction sites, piping engineers, consultants, inspection agencies etc. would find the program highly beneficial. The minimum experience required for this program is 3 months (in penetrant testing).
Visual Testing Level I-II
This course is designed to impart professional and systematic training in methodology and application of visual testing drawn up on the basis of ASNT (American Society of Non-Destructive Testing) qualification program conforming to SNT-TC-1A requirements. The course is conducted by ASNT Level III qualified instructors to provide the participants with the knowledge that is authoritative and hands-on practice.
The program covers the review of Visual testing techniques and applications (codes, procedures and acceptance standards) interpretation of indication and evaluation of test results Direct or remote type with employing lighting equipment.
The practicals include visual testing on different materials, use, and application of Direct and remote techniques and application of light and lighting equipment. Preparation of test documentation.
This is user-level certification program leading to level I/II in line with SNT-TC-1A 2011 qualification. Ideally suited for inspection personnel from manufacturing industries, fabrication workshops, plant construction sites, piping engineers, consultants, inspection agencies etc. would find the program highly beneficial. The minimum experience required for this program is 3 months (in visual testing).
Magnetic Particle Testing Level II
This course is designed to impart professional and systematic training in methodology and application of Magnetic particle testing drawn up on the basis of ASNT (American Society of Non-Destructive Testing) qualification program conforming to SNT-TC-1A requirements. The course is conducted by ASNT Level III qualified instructors to provide the participants with the knowledge that is authoritative and hands-on practice
The program covers the review of magnetization techniques and magnetic particle applications (codes, procedures, and acceptance standards) interpretation of indication and evaluation of test results Direct or induced type, Circular and longitudinal magnetization techniques with employing visible or fluorescent dry and wet particles.
The practicals include magnetic particle testing on different materials, use and application of Direct, induced, continuous, residual, circular, longitudinal magnetization and application visible, fluorescent, dry, wet particles and preparation of test documentation.
This is user-level certification program leading to level I/II in line with SNT-TC-1A 2011 qualification. Ideally suited for inspection personnel from manufacturing industries, fabrication workshops, plant construction sites, piping engineers, consultants, inspection agencies etc. would find the program highly beneficial. The minimum experience required for this program is 3 months (in magnetic particle testing).
Ultrasonic Testing Level II
This course is designed to impart professional and systematic training in the methodology of understanding and evaluation of ultrasonic examination. The course is conducted by ASNT Level III qualified instructors to provide the participants with knowledge.
The course includes a review of conventional and non-conventional ultrasonic techniques, codes, procedures, and acceptance standards etc, backed up by extensive interpretation practical’s covering selection of transducers, frequencies, calibration of equipment, various calibration blocks, sizing, evaluation and interpretation of discontinuities.
This is a user-level certification program leading to level I/II in line with SNT-TC-1A 2011 qualification. Ideally suited for inspection personnel from manufacturing industries, fabrication workshops, plant construction sites, piping engineers, consultants, inspection agencies etc. would find the program highly beneficial. The minimum experience required for this program is 1 year. (in Ultrasonic testing).
Radiographic Testing Level II
This course is designed to impart professional and systematic training in the methodology of understanding and evaluation of radiographic examination. The course is conducted by ASNT Level III qualified instructors to provide the participants with the knowledge that is authoritative and hands-on practice based on the interpretation of thousands of radiographs.
The course includes a review of conventional and non-conventional radiography, techniques, codes, procedures, and acceptance standards, etc, backed up by extensive interpretation practical’s covering IQI sensitivity, contrast, definition, density, artifacts, and pass / fail evaluation.
This is a user-level certification program leading to level I / II in line with SNT-TC-1A 2011 qualification. Ideally suited for inspection personnel from manufacturing industries, fabrication workshops, plant construction sites, piping engineers, consultants, inspection agencies, etc. Who are doing radiography in-house or getting it done from side agencies, and engaged in radiographic interpretation & reporting would find the program highly beneficial. The minimum experience required for this program is 1 year. (in Radiographic testing).
GTAW –Titanium (PLATE)
| Program code | Duration | Practical Duration | Theory Duration |
|---|---|---|---|
| EW – 01 | 2 weeks | 104 Hrs | 56 Hrs |
This course is intended to familiarize the participants with the specific properties of Titanium and its alloys, relevant to welding. The participants will go for hands on training to achieve practical skills required to weld this metal.
Upon completion of the course, the student will be able to perform satisfactorily on jobs like tanks, vessels and structural welding. To achieve proficiency, the student must follow. Up the training with adequate practice on the jobs.
On completion, the candidates can be potentially employed in –
Fill the details below
GTAW 6G
| Program Code | Duration | Practical Duration | Theory Duration |
|---|---|---|---|
| AW-09 | 6 weeks | 200 Hrs. | 40 Hrs. |
This advance level welding course will provide opportunity to fresh and experienced aspirants for careers in Pipe welding. Understanding of Gas Tungsten Arc Welding preparation for welding pipes. Also develop the skills necessary to produce quality groove welds on 6-inch schedule 80 steel pipe in 6G positions.
Trainee will be able to perform GTAW Pipe welding processes in fabrication shops and pipe line sectors.
On successful completion of this course, the candidates can seek employment in following industries.
Fill the details below
Aluminium Welding
| Program code | Duration | Practical Duration | Theory Duration |
|---|---|---|---|
| EW – 02 | 4 Days | 20 Hrs | 12 Hrs |
This course is intended to familiarize the participants about the latest welding technology with hands-on practical application demonstrations & lectures for Practical Training in Welding Aluminium Alloys. Aluminium has become increasingly prevalent in a number of manufacturing industries because it delivers an improved strength to weight ratio over steel and is corrosion resistant. Yet, welding aluminium can be difficult compared to other materials. KGC Skills has organized this seminar to help you enhance your understanding and welding skills to achieve aluminium alloy welding success.
Certificate of participation will be issued on successful completion of the training. Participant will be able to apply the knowledge successfully in welding aluminium and its alloys.
Successful completion of the program will enhance the chances of employment of the participant in companies where aluminum welding is used. KGC placement team shall assist in identifying such companies
Fill the details below and let us get back to you:
| Program Code | Duration | Practical Duration | Theory Duration |
|---|---|---|---|
| AW-08 | 4 Weeks | 104 Hrs. | 56 Hrs. |
This course enables the student to produce quality fillet and groove welds on carbon steel using small diameter electrode wires, large-diameter gas shielded electrode wires as well as metal-cored wires.
Upon completion of the course, the student should be able to perform structural welding related to buildings and bridges and production work related to heavy equipment manufacturing.
On completion, the candidates can seek employment in the following industries
Fill the details below and let us get back to you:
| Program Code | Duration | Practical Duration | Theory Duration |
|---|---|---|---|
| AW-07 | 4 weeks | 120 Hrs. | 40 Hrs. |
This advance level welding course will provide the opportunity to fresh and experienced aspirants for careers in Pipe welding and Cross- country pipeline. The participants will be able to:
Understanding of gas Tungsten arc welding preparation for welding pipe. It develops the skills necessary to produce quality groove welds on a 6-inch schedule 80 steel pipe in the 6G positions.
The trainee will be able to perform SMAW & GTAW Pipe welding processes in fabrication shops and pipe line sectors.
On successful completion of this course, the candidates can seek employment in following industries.
Fill the details below and let us get back to you:
| Program Code | Duration | Practical Duration | Theory Duration |
|---|---|---|---|
| KGC-AW-06 | 2 Weeks | 60 Hrs | 20 Hrs |
SMAW Uphill- PIPE welder qualification and certification as per ASME sec IX is essential before any welder can be permitted to weld pressure piping joints. this course to enable welders to acquire the necessary certification. The certificate will be given to the welder after witnessing and evaluation of Qualification Test coupon prepared as per the requirements Of ASME Sec Ix code.
Upon completion of this course, the trainee would have developed skills for the pressure vessel and Boiler piping Welding.
On completion the candidates can seek employment in the following industries.
Fill the details below and let us get back to you:
| Program Code | Duration | Practical Duration | Theory Duration |
|---|---|---|---|
| AW-05 | 4 Weeks | 104 Hrs. | 56 Hrs. |
This course provides the student with a thorough understanding of uphill pipe welding and weld quality. This course helps to develop the welding skills necessary to produce quality multipacks welds on 6” diameter schedule 80 mild steel pipe in the 2G and 5G positions, using E6010 and E7018 electrodes.
Upon completion of this course, the student should have developed skills for the pressure vessel and nuclear piping fields.
On completion the candidates can seek employment in the following industries.
Fill the details below and let us get back to you:
| Program Code | Duration | Practical Duration | Theory Duration |
|---|---|---|---|
| AW-04 | 3 Weeks | 90 Hrs. | 30 Hrs. |
This course provides the student with a thorough understanding of uphill Plate welding and weld quality. This course helps to develop the welding skills necessary to produce quality multi-packs welds on mild steel Plate in the 1G, 2G and 3G positions, using E6010 and E7018 electrodes.
Upon completion of the course, the student should be able to perform structural welding related to buildings and bridges and production work related to heavy equipment manufacturing.
On completion the candidates can seek employment in the following industries
Fill the details below and let us get back to you:
To produce quality single and multiple pass groove welds on the carbon steel plate in 1G, 2G& 3G position. Using short-circuiting transfer. quality is determined through visual inspection and mechanical tests. This course develops skills for 3G- Gas Metal Arc Welder.
Upon completion of the course, the student should be able to perform structural welding related to buildings and bridges and production work related to heavy equipment manufacturing.
On completion the candidates can seek employment in the following industries
Fill the details below and let us get back to you:
| Program Code | Duration | Practical Duration | Theory Duration |
|---|---|---|---|
| AW-02 | 2 Weeks | 60 Hrs. | 24 Hrs. |
This course provides the student with a thorough understanding of uphill Plate welding and weld quality. This course helps to develop the welding skills necessary to produce quality multipacks welds on mild steel Plate in the 1G, 2G and 3G positions, using E6010 and E7018 electrodes.
Upon completion of the course, the student should be able to perform structural welding related to buildings and bridges and production work related to heavy equipment manufacturing.
On completion, the candidates can seek employment in the following industries
Fill the details below and let us get back to you:
| Program Code | Duration | Practical Duration | Theory Duration |
|---|---|---|---|
| AW-01 | 12 Weeks | 360 Hrs. | 120 Hrs. |
This Basic and advance level SMAW and GTAW welding course will provide the opportunity to fresh and experienced aspirants for careers in Pipe welding and Cross- country pipeline.
Trainee will be able to perform SMAW & GTAW Pipe welding processes in fabrication shops and pipeline sectors.
On successful completion of this course, the candidates can seek employment in following industries.
Fill the details below and let us get back to you:
SMAW+GMAW+OFW/C
| Program code | Duration | Practical Duration | Theory Duration |
|---|---|---|---|
| BW -05 | 12 weeks | 360 Hrs | 120 Hrs |
This course provides the student with a thorough technical understanding of basic skills/practice of shielding Metal Arc Welding, Gas Metal Arc Welding and oxy Fuel Gas welding and cutting. The course is carefully designed to offer the necessary theoretical and practical exposure to the SMAW, GMAW And Oxy-Fuel welding. The lessons are planned in a step-by-step approach to enable the participant to be a confident SMAW, GMAW, and oxy- Fuel welder.
SMAW Process fundamentals overview
SMAW set up, installation, maintenance & review
SMAW process-related defects, causes, and remedies
GMAW Process fundamentals Overview
GMAW set up, installation. maintenance& review
GMAW Process related defects, causes and remedies
Oxy-Acetylene welding process fundamentals overview
Oxy-Acetylene welding set up, installation, maintenance & review
Oxy-Acetylene welding-related defects cause & remedies
Welding Position techniques in fillet joint 1F, 2F, 3F, 4F and Groove joint 1G, 2G, 3G. as well as Gas cutting Practical in champers cutting
Outcome
Trainee will be able to perform SMAW,GNAW & Oxy Acetylene welding processes at entry level production in fabrication shops.
8th std. pass Student
Welder’s Helper with 1-2 years work experience
On Successful Completion of this course, the candidates can seek employment in following industries.
Structural Fabrication like bridges, roof structures, Building & construction
Heavy Fabrication
General Engineering
Fill the details below and let us get back to you:
FCAW (Flux-cored Arc Welding)
| Program code | Duration | Practical Duration | Theory Duration |
|---|---|---|---|
| BW -04 | 1 weeks | 28 Hrs | 12 Hrs |
To produce quality single and multiple pass fillet welds on the carbon steel plate in 1F, 2F position. Using short-circuiting transfer. quality is determined through visual inspection and mechanical tests. This course develops skills for Flux-cored Arc welder.
Knowledge of FCAW Welding Apparatus, Accessories, Care in handling & routine maintenance
The basic principle of semi-automatic FCAW Welding Processes
Safety Precaution in FCAW welding
Welding Variables in FCAW Welding
Characterises & Preference of elective metal transfer modes in FCAW welding
Types & attributes of shielding- gases in FCAW welding
Welding consumable’s specification, class, size & types
FCAW Process related defects, causes, and remedies
FCAW welding Application & Limitations
Upon completion of this course the student should be able to perform production and maintenance welding on mild steel including automobile assembly and repair.
Structural Arc welder
ITI pass welder
GMAW welder
Job Avenues
Process industries
Heavy Fabrication Shops
General Fabrication shop
Further learning pathways: On successful completion of the course trainees can per sue following welder courses AW-07 – GTAW+ FCAW pipe welding – 1 G
Fill the details below and let us get back to you:
GTAW (Gas Tungsten Arc Welding)
| Program code | Duration | Practical Duration | Theory Duration |
|---|---|---|---|
| BW -03 | 1 weeks | 28 Hrs | 12 Hrs |
This course provides the student with a thorough technical understanding of GTAW (Gas Tungsten Arc Welding), arc characteristics and welding safety. It provides training to develop the skill necessary to make quality gas tungsten arc welds on mild steel, stainless steel and aluminum, using both direct and alternating current. In addition, material is presented on the weld characteristics of carbon steel, stainless steel and aluminum. Information on pulsed current is included to prepare the student for more detailed applications of pulsed current used in gas tungsten arc welding.
Familiarization with GTAW / TIG welding process, equipment and accessories
Safety precautions in TIG welding
Metals that can be welded with GTAW process
Selection of shielding gases and Tungsten Electrodes and Handling Equipment
GTAW welding techniques
Selection of filler materials and care in their storage and handling
GTAW process related defect causes and remedies
Pulsed TIG welding & it’s advantages
PRACTICAL
To be able to produce quality fillet and square groove welds on thin carbon steel, stainless steel and aluminum in Fillet joint 1F,2F,and 3F positions.
Upon completion of the course, the student should be able to perform production and maintenance welding on mild steel, stainless steel, and aluminum used in the fabrication industry.
ITI Pass candidate
SMAW & Gas welding welder with practical experience of 1 year
Candidates who have completed BW-01 Course
Job Avenues
Process industries
Heavy Fabrication Shops
Oil and Gas
Further learning pathways: On successful completion of the course trainees can per sue following welder courses SMAW+GTAW pipe welding (Course code-AW-02)
Fill the details below and let us get back to you:
GMAW (Gas Metal Arc Welding)
| Program code | Duration | Practical Duration | Theory Duration |
|---|---|---|---|
| BW -02 | 1 week | 28 Hrs | 12 Hrs |
To produce quality single and multiple pass fillet welds on the carbon steel plate in 1F, 2F& 3F position. Using short-circuiting transfer. quality is determined through visual inspection and mechanical tests. This course develops skills for Gas Metal Arc Welder.
Characterises & Preference of elective metal transfer modes in GMAW welding
Types & attributes of shielding- gases in GMAW welding
Welding consumable’s specification, class, size & types ( solid/ Tubular)
GMAW Process related defects, causes, and remedies
GMAW welding Application & Limitations
Welding Position techniques in fillet joint in 1F,2F, And 3F downhill position
Upon completion of this course the student should be able to perform production and maintenance welding on mild steel including automobile assembly and repair.
Structural Arc welder
ITI pass welder
Job Avenues
Process industries
Heavy Fabrication Shops
Automobile industries
Further learning pathways: On successful completion of the course trainees can also per sue following welder courses: BW-04(Basic FCAW ) and AW-07 (GTAW + FCAW Pipe Welding – 1G)
Fill the details below and let us get back to you:
SMAW+Oxy Fuel Welding & Cutting
| Program code | Duration | Practical Duration | Theory Duration |
|---|---|---|---|
| BW -01 | 4 weeks | 120 Hrs | 40 Hrs |
This course provides the student with a thorough technical understanding of basic skills/practice of shielding Metal Arc Welding. The course is carefully designed to offer the necessary theoretical and practical exposure to the shielding metal arc welding processes. The lessons are planned in a step-by-step approach to enable the participant to be a confident SMAW welder.
Trainee will be able to perform SMAW & Oxy Acetylene welding processes at entry level production in fabrication shops.
On Successful Completion of this course, the candidates can seek employment in the following industries.